Product ID:U0-135 EBQTK
MSDS Date:04/20/1994
FSC:8010
NIIN:01-313-7292
Kit Part:Y
MSDS Number: BVBNX

CRAWFORD LABORATORIES, INC.

4165 SOUTH EMERALD AVENUE
CHICAGO, IL 60609
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 312-376-7132

Preparer: DAVID SCHMETTERER

Cage: DO165

CRAWFORD LABORATORIES, INC

CHICAGO, IL 60609 US

Telephone: 312-376-7132

Cage: 5V430

METHYL ETHYL KETONE (SARA III) (VAPOR PRESSURE 71.2 MM HG)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 46%

OSHA PEL 100 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PHENYL CARBINOL

CAS: 100-51-6

RTECS: DN3150000

Fraction By Weight: 20%

BENZALDEHYDE (IMPURITY OF PHENYL CARBINOL)

CAS: 100-52-7

RTECS: CU4375000

Fraction By Weight: 0.3%

DIBENZYL ETHER (AS IMPURITY OF PHENYL CARBINOL)

CAS: 103-50-4

RTECS: DQ6125000

Fraction By Weight: 0.1%

HYDROQUINONE MONOMETHYL ETHER (AS IMPURITY OF PHENYL

CAS: 150-76-5

RTECS: SL7700000

Fraction By Weight: 0.025%

REACTION PRODUCTS OF EPICHLOROHYDRIN & BISPHENOL A

CAS: 25085-99-8

Fraction By Weight: 8.9%

NH2CH2CH(CH3)(CH2)3NH2 (VAPOR PRESSURE 130 MM HG)

CAS: 15520-10-2

RTECS: SA0248500

Fraction By Weight: 23%

Health Hazards Acute and Chronic:OVEREXPOSURE MAY PRODUCE VARIOUS
EFFECTS, INCLUDING: ACUTE TOSICITY (HEADAHCE, DIZZINESS, NAUSEA,
UNCONSCIOUSNESS). SEVERE EYE IRRITATION (PERMANENT DAMAGE).
IRRITATED MUCOUS MEMBRANES. VOMITING DUE T O INGESTION. DEFATTING
AND DRYING OF SKIN. SENSITIZATION AFTER REPEATED CONTACT.

First Aid:EYE:FLUSH W/LUKEWRM LOW PRESSR H2O 15 MIN,LIFT EYELD.GET MED
AID.INHAL:REMOVE TO FRESH AIR.GIVE OXYGEN IF BREATH DIFFCLT.GIVE
ARTIF RESP IF NO BREATH.GET MED AID.KEEP WARM/COMFRTBL.NEVER GIVE
UNCONSCI OUS LIQ.INGEST:CALL DR IMMED.INDUCE VOMIT ON DR'S
INSTRCTN.IF VOMIT,KEEP HEAD BELOW HIP.NOTHING BY MOUTH TO
UNCONSCIOUS.SKIN:FLUSH W/H2O,REMOV CONTAM CLOTH.WASH W/SOAP&H2O.IF
IRRIT PERSIST,GET MED AID

Flash Point Method:SCC
Flash Point:22.0F,-5.6C
Lower Limits:2
Extinguishing Media:FOAM, CO2, OR DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO COOL EXPOSED CONTAINER,TO
KEEP FLAMMABLE STRUCTURES WET.DON'T ENTER FIRE AREA W/O PROTECTION
BECAUSE HAZARDOUS DECOMP PROD MAY BE PRESENT.
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A FLAMMABLE
LIQUID FIRE. SEALED CONTAINERS MAY EXPLODE IF OVERHEATED.

Spill Release Procedures:WARNING - FLAMMABLE. ELIMINATE ALL IGNITION
SOURCES. HANDLING EQUIPMENT MUST BE GROUNDED TO PREVENT SPARKING.
SOAK UP WITH AN ABSORBENT AND PLACE IN NON-LEAKING CONTAINERS. SEAL
TIGHTLY FOR PROPER DIS POSAL.

Handling and Storage Precautions:FLAMMABLE. KNOW DOT REGS BEFORE
TRANSPORT. WARNING:HOT ORGANIC CHEMICAL SUSCEPTIBLE TO SUDDEN
SPONTANEOUS COMBUSTION WHEN MIXED W/AIR.
Other Precautions:IGNIT MAY OCCUR AT TEMP BELOW AUTOIGNIT/IGNIT TEMPS.
IGNIT TEMPS DECREASE W/INCREASING VAPOR VOLUME & VAPOR/AIR CONTACT
TIME & INFLUENCED BY PRESSURE CHANGES. IGNIT MAY OCCUR AT ELEVATED
TEMP, ESPECIA LLY IN *

Respiratory Protection:IMPORTANT-MUST PROVIDE ADEQUATE VENTILATION TO
MAINTIAN VAPOR CONCENTRATIONS BELOW ESTABLISHED TLV LIMIT AS GIVEN
BY OSHA. IN MORE CONFINED AREAS NIOSH-MSHA APPROVED RESPIRATOR
EQUIPPED WITH ORGANIC VAPOR CARTRIDGE SHOULD BE WORN.
Ventilation:MUST PROVIDE ADEQUATE VENTILATION.
Protective Gloves:USE RUBBER GLOVES
Eye Protection:WEAR SAFETY GOGGLES &/OR FACE SHIELD
Other Protective Equipment:HAVE EYE BATH AND SAFETY SHOWER AVAILABLE
Work Hygienic Practices:DO NOT REUSE CONTAMINATED CLOTHING OR SHOES.
Supplemental Safety and Health
* VACUUM IF SUDDEN INGRESS AIR OR OUTSIDE PROCESS EQUIPMENT OPERATING
UNDER ELEVATED PRESSURE IF SUDDEN ESCAPE OF VAPORS OR MISTS TO
ATMOSPHERE OCCURS. ANY PROPOSED USE SHOULD BE THOROUGHLY EVALUATED
TO ASSURE SAFE OPERATING CONDITIONS AREESTABLISHED AND MAINTAINED.

Boiling Pt:B.P. Text:174 TO 401F
Vapor Density:> AIR
Spec Gravity:0.86
Viscosity:65 KU
Evaporation Rate & Reference:3.19 X N-BU AC
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR LIQUID; SOLVENT ODOR
Percent Volatiles by Volume:73.3
Corrosion Rate:NOT CORR

Stability Indicator/Materials to Avoid:YES
MAY BE INCOMPATIBLE WITH OXIDIZING AGENTS AND STRONG ALKALIES.
Stability Condition to Avoid:AVOID HEAT, SPARKS, OPEN FLAMES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCTS
LIKE THIS MAY GENERATE HIGHLY POISONOUS CARBON MONOXIDE AND OTHER
TOXIC GASES.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH CURRENT
LOCAL, STATE, AND FEDERAL REGULATIONS. CONTACT AN APPROVED DISPOSAL
FACILITY. EPA HAZARDOUS WASTE CODES: D001, IGNITABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.